Scan Display; Setting Up The Image Quality Selections; Density; Contrast - Xerox 6279 User Manual

Copying and Printing Documents

Scan Display

This feature displays a scanned preview as your original is fed into the Scanner. The
preview reflects data taken directly from the Scanner and may not represent the quality
of the final output. Depending on the scan mode, additional image conversion takes
place beyond the initial scan.
Check mark the Scan Display box located on the Basic Copy screen to enable.
If the Scan Display box is not visible on the Basic Copy screen, it has been disabled by
the System Administrator in Machine Information > Administration
> General Administration > Set Scan Display.

Setting up the Image Quality selections

You can configure the Image Quality features displayed to ensure that you obtain the
best image results from each original.
This section provides procedures for setting up the following:

• Density

• Contrast

• Sharpness
• Background Suppression
Density
The Density option allows you to adjust the lightness or darkness of the copies relative
to the original.
1. Select Copy on the Services menu.
The Copy screen displays.
2. Select the Image Quality tab.
3. Select the best Density match using the scroll key.
Contrast
The Contrast option increases or decreases the contrast of the copy relative to the
original. High contrast settings increase the difference between the light and dark areas
of an image by making the light areas lighter and the dark areas darker. Low contrast
settings exhibit smaller differences between the light and dark areas. Use this feature
to copy photographs and posters.
1. Select Copy on the Services menu.
® ® 2-15
Xerox 6279 Wide Format Solution
Copy/Scan User Guide