Inter-Tel AXXESS 8662 User Manual page 59

To store a number in a speed-dial location:
With the handset in the cradle, dial
1.
Dial the speed-dial location (0-9) you want to program.
2.
Enter the desired name for the speed-dial number, as described below:
3.
•
Alphanumeric mode (Message button and lamp lit): Press the dialpad buttons
to enter the desired characters. (Refer to the chart on
of times a button is pressed determines which character is entered. For exam-
ple, 533266 would enter "JEAN." When adjoining characters are located
under the same button, press
For example, 66
correspond to the letters printed on dialpad buttons 2-9.) Press
to leave a space. Press
•
Press the ACCEPT menu button to save the name.
Dial the extension number or telephone number to be stored, as described below:
4.
•
Numeric mode (Message button and lamp unlit): Enter the number. Press
for a hyphen (-),
backspace.
If your number includes an asterisk, pound, hookflash, or pause, use the
menu buttons to enter the special character.
•
Press the ACCEPT menu button on the display to save the number.
TIP:
To dial outside telephone numbers without first selecting an outgoing line,
enter the Outgoing Call access code (default is
number.
To erase a Station Speed-Dial name and/or number:
With the handset in the cradle, dial
1.
Dial the desired location code (0-9) or press the desired Station Speed-Dial but-
2.
ton.
Press
3.
MUTE
Press
4.
#
Press
5.
MUTE
Press
6.
#
®
Axxess Model 8662 Phone User Guide – Axxess IP Mode
6667776 would enter "NORM." (Note that letters
FWD
MUTE
for a colon (:),
repeatedly until the name is erased.
or the ACCEPT menu button to continue.
repeatedly until the number is erased.
or the ACCEPT menu button to exit.
.
3 3
8
once to advance to the next character.
FWD
if you need to backspace.
to leave a space, or
FWD
) before the outside telephone
8
.
3 8 3
page 58.) The number
twice
FWD
#
to
MUTE
49