Using A Headset - Inter-Tel AXXESS 8662 User Manual

U H
SING A EADSET
With an electret headset, you can talk on the phone handsfree, without using your
speaker and microphone.
NOTE:
If your headset has a power-saver mode, make sure the system administrator
has the Headset Connect Tone flag enabled in the telephone system. If this flag is not
enabled, you may miss the first few seconds of incoming calls.
To connect a headset:
Insert the headset plug into the headset jack.
1.
With the handset in the cradle, dial
2.
3 1
ON.
NOTE:
If using a headset, press
To disconnect a headset:
Unplug the headset cord from the headset jack.
1.
With the handset in the cradle, dial
2.
3 1
OFF.
NOTE:
If you have both a headset and a handset connected to your phone and you
are using the headset, you can quickly transfer audio to the handset by lifting the hand-
set from the cradle. Press
the handset in the cradle.
26
(Headset On/Off feature code). The display shows HEADSET MODE
7
to connect and disconnect calls.
(Headset On/Off feature code). The display shows HEADSET MODE
7
to transfer the call back to the headset before replacing
(Headset On feature code) or dial
3 1 5
(Headset Off feature code) or dial
3 1 6
®
Axxess Model 8662 Phone User Guide – Axxess IP Mode