Block Out - Yealink SIP-T46G User Manual

For more information on the valid value of the Account field, refer to
on page 73.
4. Click Confirm to accept the change.
Note
The default values of minimum and maximum length are 1 and 15 respectively.
Area code is configurable via web user interface only.
You can block some specific numbers (at most 10) from being dialed on your phone.
When you dial a block out number on your phone, the dialing will fail and the LCD
screen will prompt "Forbidden Number".
To add a block out number via web user interface:
1. Click on Settings->Dial Plan->Block Out.
2. Enter the desired value in the BlockOut Number field.
3. Enter the desired line ID in the Account field or leave it blank.
Customizing Your Phone
Replace Rule
77