Transfer; Hold - Yealink SIP-T46G User Manual

Usage:
1. Press the DSS key to forward an incoming call to the number specified in the Value
field.
2. When call forward is in phone mode, press the DSS key to activate call forward for
the phone.
3. When call forward is in custom mode, press the DSS key to access the custom call
forward interface. You can activate or deactivate call forward for one or all
accounts.
Note If the Value field is left blank, the DSS key performs the same as the Forward soft key
when receiving an incoming call.
When call forward is activated, the forward key LED will illuminate solid green.

Transfer

You can use this key feature to handle the call differently depending on the transfer
mode on DSS key when there is an active call on the phone.
Dependencies:
Usage:
When the transfer mode on DSS key is Blind Transfer, press the DSS key to complete

the blind transfer to the number specified in the Value field.
When the transfer mode on DSS key is Attended Transfer, press the DSS key to dial

out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
When the transfer mode on DSS key is New Call, press the DSS key to place a new

call to the number specified in the Value field.
Note Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer. For more information on how to configure the transfer mode via DSS
key, refer to Busy Lamp Field (BLF)
When leaving the Value field blank, the DSS key performs the same as the TRANSFER key
or the Transfer soft key during a call. For more information, refer to
105.

Hold

You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies:
Type (Key Event)
Key Event (Transfer)
Label (key label displayed on the LCD screen)
Value (the number you want to transfer to)
on page 117.
Type (Key Event)
Key Event (Hold)
Customizing Your Phone
Call Transfer on page
67