Network Conference - Yealink SIP-T46G User Manual

User Guide for the SIP-T46G IP Phone
4. When the second party answers the call, press the Conference soft key again to join
all parties in the conference.
To join two calls in a conference:
1. Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2. Press
(for example, select the call on account 1).
3. Press the Conference soft key to join the two calls in the conference on the selected
account.
During the conference call, you can do the following:
Press
Press the Split soft key to split the conference call into two individual calls.
Press the Manage soft key, and then press
Press the Far Mute soft key to forbid the party from speaking.
-
- Press the Remove soft key to remove the party from the conference call.
- Press the Back soft key to return to the previous interface.
Press
Press the End Call soft key to drop the conference call.
You can use network conference feature on the SIP-T46G IP phone to conduct a
conference with multiple participants.
This feature allows you to perform the following:
Join two calls together into a conference call.

Invite another party into an active conference call.

To use this feature, contact your system administrator for the network conference URI in
advance.
108
or to select the call for conference and make sure the call is active
or the Hold soft key to place the conference on hold.
to mute the conference call.
or to select the desired party: