Headset Prior; To Deactivate The Headset Mode; To Enable Headset Prior Via Web User Interface - Yealink SIP-T46G User Manual

User Guide for the SIP-T46G IP Phone
Enter the desired number and press the Send soft key, then the phone will place a
call using the headset automatically. For more information on using the headset to
place a call, refer to

To deactivate the headset mode:

1. Press
The HEADSET key LED goes out when the headset mode is deactivated.
You can use headset in priority when enabling headset prior. This feature is especially
useful for permanent or full-time headset users.

To enable headset prior via web user interface:

1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
To use headset prior, you should activate the headset mode in advance:
1. Physically connect the headset.
2. Press
Note
If headset prior is enabled, the headset mode will not be deactivated until you press the
HEADSET key again.
Headset prior is configurable via web user interface only.
54
Placing Calls
again on the phone.
to activate the headset mode.
on page 83.