Yealink SIP-T46G User Manual page 119

To configure network conference via web user interface:
1. Click on Account->Advanced.
2. Select Network Conference from the pull-down list of Conference Type.
3. Enter the conference URI (e.g., conference@example.com) in the Conference URI
field.
4. Click Confirm to accept the change.
Note
Network conference is configurable via web user interface only.
To set up a network conference call:
1. Place a call to the first party.
2. Press the Conference soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and press
4. When the second party answers the call, press the Conference soft key to add the
second party to the conference.
5. Press the Conference soft key to place a new call.
The conference is placed on hold.
6. Enter the number of the new party and then press
7. When the new party answers the call, press the Conference soft key to add the new
party to the conference.
8. Repeat steps 5 to 7 until you have added all intended parties.
Basic Call Features
, , or the Send soft key.
, , or the Send soft key.
109