Backlight; To Upload The Customized Wallpaper Via Web User Interface - Yealink SIP-T46G User Manual

User Guide for the SIP-T46G IP Phone
2. Press
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Wallpaper is configurable via web user interface at the path Settings->Preference.

To upload the customized wallpaper via web user interface:

1. Click on Settings->Preference.
2. In the Upload Wallpaper field, click Browse to select the wallpaper image from your
local system.
3. Click Upload to upload the file.
4. Click Confirm to accept the change.
The customized wallpaper appears in the pull-down list of Wallpaper.
You can configure backlight to adjust the brightness of the LCD screen. Backlight On
Intensity is used to adjust the backlight intensity of the LCD screen. Backlight time
specifies the delay time to turn off or dusky the backlight when the IP phone is inactive.
Backlight Idle Intensity decides whether the IP phone turns off or dusky the backlight of
the LCD screen after a period of inactivity.
You can configure the backlight status on the LCD screen as the following types:
Always On: Backlight is on permanently.

1min, 2min, 5min, 10min, 30min: Backlight goes out or turns dusky when the phone

has been inactive for approximately 1min, 2min, 5min, 10min or 30min.
20
or , or the Switch soft key to select the desired wallpaper image.