Answering Calls - Yealink SIP-T46G User Manual

With the handset on-hook, enter the desired number using the keypad.
-
Press
To place a call using the headset:
Do one of the following:
With the optional headset connected, press
-
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press
With the optional headset connected, press
-
Enter the desired number using the keypad.
Press
Note
To permanently use the headset mode, refer to
To place multiple calls:
You can have more than one call on your SIP-T46G IP phone. To place a new call during
an active call, do one of the following:
Press the line key. The active call is placed on hold.
-
Enter the desired number using the keypad.
Press
Press
-
Press the New Call soft key.
Enter the desired number using the keypad.
Press
You can press
to retrieve the desired call.
When you are not in another call, you can answer a call in three ways:
Using the handset

Using the speakerphone

, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
or the Hold soft key to place the original call on hold.
, , or the Send soft key.
or to switch between calls, and then press the Resume soft key
to activate the headset mode.
to activate the headset mode.
Headset Prior on page 54.
Basic Call Features
85