Call Recording - Yealink SIP-T46G User Manual

User Guide for the SIP-T46G IP Phone
If you select New Call, press the BLF key to place a new call to the monitored user.
3. Click Confirm to accept the change.
Note
Transfer mode via DSS key is configurable via web user interface only.
You can record calls by pressing a record key on the phone. The SIP-T46G IP phone
supports record and URL record.
Two ways of call recording:
Record: The phone sends SIP INFO message containing a specific header "Record:

on/off" to trigger a recording.
URL Record: The phone sends HTTP URL request to trigger a recording. Contact your

system administrator for the predefined URL.
Call record is not available on all servers. Contact your system administrator for more
Note
information.
To configure a record key via phone user interface:
1. Press Menu->Call Features->DSS Keys.
2. Select the desired DSS key.
3. Press
4. Press
120
or , or the Switch soft key to select Key Event from the Type field.
or , or the Switch soft key to select Record from the Key Event field.