Do Not Disturb (Dnd) - Yealink SIP-T46G User Manual

User Guide for the SIP-T46G IP Phone
The line key LED flashes green. The phone will beep softly every 30 seconds to remind
you that you still have a call on hold.
To resume a held call:
1. Press
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
Press
-
to retrieve the desired call.
Press the corresponding line key to retrieve the call.
-
If more than two calls are on hold, a numbered prompt appears on the LCD screen, for
example "2/4", indicating that this is the second call out of four calls.
You can use DND to reject incoming calls automatically on the phone. Callers will
receive a busy message.
You can enable/disable DND for the phone system, or you can customize DND for each
or all accounts. Two DND modes:
Phone (default): DND is effective for the phone system.

Custom: DND can be configured for each or all accounts.

You can receive incoming calls from authorized numbers when DND is enabled.
To configure the DND mode via web user interface:
1. Click on Features->Forward & DND.
94
or the Resume soft key.
or to switch between the calls, and then press the Resume soft key