System Customization; Headset Use; Headset Mode Activation/Deactivation; Contact Management - Yealink SIP-T46G User Manual

For more information, refer to
To delete an entry from the call history list:
1. Press the History soft key.
2. Press
call lists.
3. Press
4. Press the Delete soft key.
To delete all entries from the call history list:
1. Press the History soft key.
2. Press
call lists.
3. Press the Option soft key, and then select Delete All from the prompt list.
4. Press the OK soft key.
The LCD screen prompts "Delete all records?".
5. Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
If you want to use a wired headset, physically connect your headset and activate the
headset mode for use. For more information on physically connecting a headset, refer
to Phone Installation
If you want to use a wireless headset, insert the Bluetooth USB dongle into the USB port on
the back of the phone. For more information on using a Bluetooth headset, refer to
Headset
on page 55.
This section provides the introduction of the wired headset.
Note
If both a Bluetooth headset and a wired headset are connected, only the Bluetooth
headset can be used.
To activate the headset mode:
1. Press
The HEADSET key LED illuminates solid green when the headset mode is activated.
Press the line key or the Answer soft key to answer an incoming call. The call will be
connected to your headset automatically.

Contact Management

or to switch between All, Missed, Placed, Received and Forwarded
or to select the desired entry.
or to switch between All, Missed, Placed, Received and Forwarded
on page 11.
on the phone.
Customizing Your Phone
on page 33.
Bluetooth
53