To Activate The Keypad Lock Via Phone User Interface - Yealink SIP-T46G User Manual

Keypad lock consists of the following:
Menu Key:
Function Keys:
All Keys:
Note
The emergency number setting, if desired, must be made before lock activation. For
more information, refer to

To activate the keypad lock via phone user interface:

1. Press Menu->Advanced (password: admin) ->Phone Settings->Keypad Lock.
2. Press
Enable field.
3. Press
Lock Type field.
4. Press the Save soft key to accept the change.
Long press
The Menu soft key is locked. You cannot access the menu of the
phone until unlocked.
The function keys are locked. You cannot use the MESSAGE,
REDIAL, HOLD, MUTE, TRANSFER, OK, X, navigation keys, soft
keys and line keys until unlocked.
All keys are locked except the Volume key. You are only
allowed to dial emergency numbers, reject incoming calls by
pressing the X key, answer incoming calls by lifting the handset,
pressing the Speakerphone key, the HEADSET key or the OK
key, mute an active call by pressing the X key, place an active
call on hold by pressing the Hold soft key, resume the held call
by pressing the Resume soft key, and end the call by hanging
up the handset or pressing the Speakerphone key.
Emergency Number
or , or the Switch soft key to select Enabled from the Keypad Lock
or , or the Switch soft key to select the desired type from the Keypad
to lock the keypad immediately when the phone is idle.
Customizing Your Phone
on page 78.
27