Setting The Code Of Your Station; Turning On The New Pager Function - Yaesu FTM-400DR Operating Manual

Setting the Code of Your Station

Set the "personal code (your code)" used to be called by other stations.
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [SIGNALING].
3
Tap [5 PAGER CODE].
The Pager Code Settings screen appears.
4
Tap [RX CODE 1].
The code number appears in orange.
5
Select code with the O.
Turn the O to select a code.
Turn the O to select the first code from among 1-50
6
Press O shortly.
The first code is set and appears in green.
7
Tap [RX CODE 2].
The code number appears in orange.
8
Turn the O to select a code.
Turn the O to select the second code from among 1-50.
9
Press O shortly.
The second code is set and appears in green.
10
Press and hold M over 1 second.
The code of your station is set and the screen returns to the previous one.
Reference • Factory Setting: [05 47]
• The first and second codes contained in your personal code may be inverted, i.e.,
"05 47" and "47 05" are recognized as being the same code.
• If the same personal code (group code) is specified for all persons, all persons can be
called at the same time.

Turning on the New Pager Function

1
Press F shortly.
The Function Menu appears.
2
Tap [SQL] and select [PAGER].
Tap until the [SQL] display switches to [PAGER].
3
Press F shortly.
4
Tap [SQL].
Now, you can "call" or "wait" a remote station using
the new pager function.
Calling Only a Specific Station New Pager Function
FCC ID: K6620345X40
IC: 511B-20345X40
49