Setting The Background Color Of The Screen; Setting The Frequency Width For Band Scope - Yaesu FTM-400DR Operating Manual

Setup Menu

Setting the Background Color of the Screen

The background color for the screen can be selected from the following 5 colors:
• Green • Blue
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [DISPLAY].
3
Tap [2 BACKGROUND COLOR] and select a
background color.
The background color changes in the following order
each time [2 BACKGROUND COLOR] is tapped.
[GREEN] → [BLUE] → [ORANGE] → [PURPLE] →
[GRAY]
4
Press and hold M over 1 second.
The background color is set and the screen returns to
the previous one.
Reference • Factory Settings: All screens are set to [GREEN].

Setting the Frequency Width for Band Scope

The frequency band width to be displayed when Band Scope is operated can be set.
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [DISPLAY].
3
Tap [3 BAND SCOPE] and select frequency band
width.
Frequency band width switches between [NARROW]
and [WIDE] each time [3 BAND SCOPE] is tapped.
NARROW: Frequency band width appears in a narrow
search width.
WIDE: Frequency band width appears in a wide
search width.
4
Press and hold M over 1 second.
The frequency band width is set and the screen returns to the previous one.
Reference • Factory Setting: [NARROW]
60
• Orange • Purple • Grey
FCC ID: K6620345X40
IC: 511B-20345X40