Deleting Settings Configured for APRS Function.
You can delete all information for settings configured for the APRS function.
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [RESET/CLONE].
3
Tap [6 APRS RESET].
The deletion confirmation screen appears.
4
Tap [OK?].
Settings information for the APRS Function are
deleted.
To cancel deletion, tap [Cancel].
5
Press and hold M over 1 second.
Returns to the previous screen.
The Clone Function For copying settings to another FTM-400DR
Information registered to this FTM-400DR can be copied to other FTM-400DR.
Additionally, information registered to other FTM-400DR can be copied to this
FTM-400DR.
1
Turn off the FTM-400DR and connect the Clone Cable.
Connect this FTM-400DR with another FTM-400DR
with the Clone Cable.
2
Press P.
Turn on the power of both FTM-400DR.
3
Press and hold M over 1 second.
4
Tap [RESET/CLONE].
5
Tap [7 CLONE].
6
Tap [This radio → other (X)] for the sending
FTM-400DR (copy source).
Tap [This radio ← other (X)] for the receiving
FTM-400DR (copy destination).
7
Tap [OK?].
Copying (Cloning) starts.
To cancel Cloning, tap [Cancel].
Once copying (Cloning) is complete, [COMPLETE] appears on screen.
8
Turn off the power of FTM-400DR and disconnect the cable.
FCC
ID:
K6620345X40
IC:
511B-20345X40
Setup Menu
77