Basic Operation; Communication; Changing The Beep Sound - Yaesu FTM-400DR Operating Manual

Communication

1
Press and hold P over 1 second.
Turn on the power.
2
Adjust volume with [VOL].
3
Tap [SQL].
Adjust Squelch
4
Adjust frequency using O.
Reference • The frequency can also be adjusted using [UP],
[DOWN], and [0] to [9] on the microphone.
5
Speak by pressing [PTT] on the microphone.
6
Press and hold P over 1 second.
Turn off the power.
Reference
• The type of radio is set automatically.
• The type of radio can also be changed manually (See page xx).
• The frequency can also be selected with the [UP] and [DOWN] on the microphone.

Changing the Beep Sound.

The operation confirmation sound (Beep Sound), heard when keys are operated, can be
changed.
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [CONFIG].
3
Tap [8 BEEP] and select desired Beep Sound.
The Beep Sound will change in the following order
each time [8 BEEP] is tapped.
[OFF] → [LOW] → [HIGH]
4
Press and hold M over 1 second
The Beep Sound is set and the screen returns to the
previous screen.
20

Basic Operation

FCC ID: K6620345X40
IC: 511B-20345X40