Setup Menu
Setting the Clock Shift of the Microcomputer
You can set microcomputer clock signal so as not to receive as internal spurious by high
frequency. Select [A] for normal time usage.
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [CONFIG].
3
Tap [9 CLOCK TYPE] and set A/B.
Tapping [9 CLOCK TYPE] switches between [A] and
[B].
A: The clock shift function automatically switches
between ON and OFF.
B: The clock shift function is active at all times.
4
Press and hold M over 1 second.
The clock type is set and the screen returns to the previous one.
Reference
• Factory Setting: A
Setting the Program Keys on the Microphone
Assign functions to the program keys (P1 to P4) on the accessory microphone (MH-48).
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [CONFIG].
3
Tap [10 MIC PRG KEY].
The Microphone Program Keys setting screen
appears.
4
Tap the Program key you would like to set.
Tap the Program Key (P1 to P4) you would like to
assign a function.
The functions that can be assigned are displayed.
If the function you would like to assign is not
displayed, scroll the screen with [▲] and [▼].
5
Tap the function you would like to assign.
The function to assign to the program key is selected.
6
Tap [BACK].
The screen returns to the program key (P1 to P4)
selection.
7
Set functions for the other program keys.
Repeat steps 4 to 6 and assign functions to other function keys.
8
Press and hold M over 1 second.
The function is assigned to the program key and returns to the previous screen.
Reference
• Factory Setting: P1: SQL OFF
66
P2: HOME
P3: RPT SHIFT
FCC
ID:
K6620345X40
IC:
511B-20345X40
P4: TX POWER