Using The Remote Control Buttons - SMART Board SB800ix2 Configuration And User's Manual

CHAPTER 3
USING YOUR INTERACTIVE WHITEBOARD SYSTEM

Using the remote control buttons

The projector remote control enables you to access on-screen menus and change projector settings.
Use the Power button on the remote control or ECP to put the projector into Standby mode or to
turn it on. You can also use the Input button on the remote control or ECP to switch sources on the
projector.
Number Function
1 Input
2 Menu
3 (Left), (Right),
(Up) and (Down) arrows
4 Hide
5 Mode
6 Mute
7
(Power)
8 (Enter)
9 (Volume Up)
10 (Volume Down)
14 smarttech.com/kb/170340
Description
Select a video and audio input source on the
projector and the associated USB input source on
the ECP, if present.
Show or hide the projector menus.
Change the menu selections and adjustments.
Freeze, hide or display the image:
Press once to freeze the image.
l
For example, you can display a question on the
screen while you check your e-mail.
Press again to hide the image, that is, to
l
display a black screen.
Press again to return to the live image.
l
Select a display mode.
Mute audio amplification.
Turn on the projector or put it into Standby mode.
Accept the selected mode or option.
Increase audio amplification volume.
Decrease audio amplification volume.