Setting The Language For Navigation; Selecting The Measuring Unit; Switching Announcement Of The Estimated Time Of Arrival On/Off - Pioneer ANH-P10MP Operation Manual

Section
02 Navigation
Setting the language for navi-
gation
1 In the system settings menu, select
"LANGUAGE*" and press NAVI/OK.
The language selection list appears.
2 Select the language and then press
NAVI/OK.
3 If a list appears, select the voice and
then press NAVI/OK.
The language and voice is accepted and in-
stalled, and a screen appears telling you that
the language installation has completed.
4 Press NAVI/OK.
The system returns to the system settings
menu.
Notes
• In the case you have mistakenly switched to a
language you cannot read, perform operation
by following the asterisk (*) on the system set-
tings menu.
• The language set here is for the navigation
screen. If you want to change the language
displayed for the Audio screen, refer to Select-
ing the display language on page 93.
42
En

Selecting the measuring unit

1 In the system settings menu, select
"MEASURING UNIT" and press NAVI/OK.
2 Select the desired option and then
press NAVI/OK.
The measuring unit is accepted and the sys-
tem returns to the system settings menu.
"METRIC" indicates calculation in metres.
"IMPERIAL" indicates calculation in yards.
Switching announcement of
the estimated time of arrival
on/off
1 In the system settings menu, select
"ANNOUNCEMENT ETA" and then press
NAVI/OK.
ETA stands for Estimated Time of Arrival.
2 To select between ANNOUNCEMENT
ETA "ON" and "OFF", press NAVI/OK brief-
ly.
3 Press and hold NAVI/OK.
The setting is accepted and the system re-
turns to the system settings menu.