Displaying Dynamic Label; Storing And Recalling Dynamic Label; Advanced Dab Tuner Operation; Dab Tuner Function Menu - Pioneer ANH-P10MP Operation Manual

DAB Tuner

Displaying dynamic label

1 Press NEXT until "D.TEXT" appears.
2 Press D.TEXT to switch to the dynamic
label mode.
3 Press or to recall the three most
recent dynamic labels.
Pressing or switches between the cur-
rent and the three dynamic label data dis-
plays.
If there is no dynamic label data in memory
the display will not change.
Notes
• Press BAND/ESC to cancel the dynamic label
mode.
• If there is no dynamic label data stored in the
tuner, and do not operate.
Storing and recalling dynamic
label
You can store data from up to six dynamic la-
bel transmissions at MEMO1 – MEMO6.
1 Display the dynamic label you want to
store in memory.
Refer to Displaying dynamic label on this
page.
2 To store the desired dynamic label,
press and hold any of the buttons MEMO1
– MEMO6 until "DAB memo" appears.
The next time you press the same MEMO1 –
MEMO6 button in the dynamic label display
the stored text is recalled from memory.
Advanced DAB tuner
operation

DAB tuner function menu

The DAB tuner function menu has the follow-
ing functions:
AS (announce support)
ch LIST (preset service list)
S.LIST (available service list)
PTY (available PTY search)
P/2ND (primary/secondary)
SF (service follow)
1 Press FUNC to display the function
menu.
2 To return to the frequency display,
press BAND/ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned.
Section
09
79
En