Storing And Recalling The Service; Changing The Label; Receiving The Road Traffic Flash And Transport Flash; Receiving News Flash - Pioneer ANH-P10MP Operation Manual

Section
09 DAB Tuner
5 Press and hold
and release to select an ensemble.
Storing and recalling the
service
1 Press NEXT until "1" – "6" appear.
2 When you find a service that you want
to store in memory, press and hold any of
a preset tuning button 1 – 6 until the pre-
set number stops flashing.
The service has been stored in memory at the
selected button.
The next time you press the same preset tun-
ing button 1 – 6, the stored service is recalled
from memory.
Note
You can also use
frequencies assigned to preset tuning button 1-
6.

Changing the label

Press DISP to select the desired display.
Each press of DISP changes the display in the
following order:
SERVICE (service label) and COMPONENT
(service component label)—D.TEXT (dynam-
ic label segment head line)—SERVICE (serv-
ice label) and ENSEMBLE (ensemble label)—
SERVICE (service label) and PTY (PTY label)
Notes
• "TUNED" shows the service currently re-
ceived.
• With a service component that has no service
component label or dynamic label, the dis-
78
En
or for one second
and to recall DAB station
play will be blank when you switch to service
component label and dynamic label.
Receiving the road traffic
flash and transport flash
Press TA to turn road traffic flash and
transport flash on.
" TRFC" or "T" appears on the display.
To turn the road traffic flash and transport
flash off, press TA again.
Press TA while the road traffic flash and
transport flash are being received to cancel the
announcement interruption.
Receiving news flash
Press NEWS to turn news flash on.
" NEWS" or "N" appears on the display.
To turn news flash off, press NEWS again.

Using dynamic label

Dynamic label provides character information
concerning the service component you're cur-
rently listening to.
Notes
• The tuner automatically memorises the three
latest dynamic labels received, replacing text
from the least recent reception with new text
when it is received.
• You can store data from up to six dynamic la-
bel transmissions in buttons MEMO1 –
MEMO6.
• When no dynamic label is currently being re-
ceived, "No text" is displayed.