Switching The Rds Display; Selecting Alternative Frequencies; Using Pi Seek - Pioneer ANH-P10MP Operation Manual

RDS

Switching the RDS display

When you tune in an RDS station its pro-
gramme service name is displayed. If you
want to know the frequency you can.
Press DISP.
Press DISP repeatedly to switch between the
following settings:
Programme service name — Frequency
PTY (programme type ID code) information is
listed in PTY list on page 55.
PTY information and the frequency of the cur-
rent station appears on the display for eight sec-
onds.
If a PTY code of zero is received from a sta-
tion, display is blank. This indicates that the sta-
tion has not defined its programme contents.
If the signal is too weak for this product to
pick up the PTY code, the PTY information display
is blank.
Selecting alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other
problems, the unit will automatically search
for a different station in the same network
which is broadcasting a stronger signal.
• AF is on as a default.
1 Press FUNC and then press AF to select
the AF mode.
2 Press AF to turn the AF function on.
The light illuminates.
Press AF again to turn the AF function off.
Notes
• Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
• When you recall a preset station, the tuner
may update the preset station with a new fre-
quency from the station's AF list. (This is only
available when using presets on the "FM–1"
or "FM–2" bands.) No preset number appears
on the display if the RDS data for the station
received differs from that for the originally
stored station.
• Sound may be temporarily interrupted by an-
other programme during a AF frequency
search.
• AF can be turned on or off independently for
each FM band.

Using PI Seek

If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station
with the same programming. During the
search, "PI Seek" is displayed and the output
is muted. The muting is discontinued after
completion of the PI Seek, whether or not a
different station is found.
Section
05
51
En