Advanced Tuner Operation; Tuner Function Menu; Storing And Recalling Broadcast Frequencies - Pioneer ANH-P10MP Operation Manual

Section
04 Tuner

Advanced tuner operation

Tuner function menu

The tuner function menu has the following
functions:
BSM (best stations memory)
LOC (local seek tuning)
AF (alternative frequencies search)
PTY (programme type selection)
REG (regional)
FM
MW/LW
1 Press FUNC to display the function
menu.
2 To return to the frequency display,
press BAND/ESC.
If MW/LW band is selected, you can only se-
lect "BSM" or "LOC".
Note
"AF", "PTY" and "REG" are RDS functions
•
for FM bands. See Selecting alternative fre-
quencies
on page 51
and Limiting stations to regional
on page 53
programming
• If you do not operate the function within
about 30 seconds, the display is automatical-
ly returned to the frequency display.
48
En
, Using PTY functions
.
on page 52
Storing and recalling
broadcast frequencies
You can easily store up to six broadcast fre-
quencies for later recall with the touch of a
button.
1 Find a frequency that you want to
store in memory.
2 Press NEXT until "1" - "6" appears.
3 Press a preset tuning button 1 – 6 and
hold until the preset number stops flash-
ing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
4 Press the same preset tuning button 1
– 6.
The radio station frequency is recalled from
memory.
Notes
• This product's AF (alternative frequencies
search) function can be turned on and off. AF
should be off for normal tuning operation (re-
fer to Selecting alternative frequencies on
page 51).
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 MW/LW stations can be
stored in memory.
• You can also use
tion frequencies assigned to preset tuning
buttons 1 – 6.
and to recall radio sta-