Playing An Audio Cd - Pioneer ANH-P10MP Operation Manual

Before You Start
7 Rotate VOLUME to increase or de-
crease the volume.
You can adjust the volume of the guidance
voice of the Navigation System while naviga-
tion announcement are being made.
• Clockwise: Increasing the volume
Counter-clockwise:
•
ume
Never set the volume of your Navigation
System so high that you cannot hear outside
traffic and emergency vehicles.
Set your destination by repeating the above
operations. After the destination have been
set and the route has been calculated, the
Navigation System starts giving route guid-
ance. Refer to Route guidance on page 31.
Notes
• During the calculation,
play. Once the calculation has been complet-
ed, extinguishes, you can remove the
navigation CD and insert an audio CD.
• After setting your destination, wait for
(calculation in progress) to disappear before
starting the vehicle.
Decreasing the vol-
flashes on the dis-

Playing an audio CD

This section describes how to use the built-in
CD player. For details or audio-related func-
tions, refer to each section (section 03 to sec-
tion 11) from page 44.
1 Press OPEN to open the front panel.
CD loading slot appears.
2 Remove the navigation CD.
CD loading slot
If the navigation CD has not been inserted,
proceed to step 3.
3 Insert a CD into the CD loading slot.
Reading of the disc starts.
4 Close the front panel.
5 When the Navigation screen is shown,
press SOURCE to enter the Audio mode.
SOURCE button
Section
01
button
17
En