Setting The Time; Saving The Position - Pioneer ANH-P10MP Operation Manual

Navigation
Note
You cannot perform any operation during route
guidance. First delete the route, or wait until you
have reached your destination.

Setting the time

In order to achieve correct navigation on
routes requiring guidance under time restric-
tions and to calculate the estimated time of
arrival, it is necessary to set the GMT time
transmitted from satellites to the current time
zone.
1 In the system settings menu, select
"TIME" and press NAVI/OK.
2 To change the time display, press 24H.
The multi-function button changes to 12H
and the time display changes from the 24
hour to the 12 hour display.
You can return to the 24 hour display by
pressing 12H.
3 To change the time every half an hour,
press + or -.
4 Press OK.
The time set is accepted and the programme
returns to the system settings menu.
You can also operate by pressing NAVI/OK.

Saving the position

1 In the system settings menu, select
"SAVE POSITION" and then press NAVI/
OK.
The current position, in degrees of longitude
and latitude, is displayed.
2 To store the current position, press
NAVI/OK again.
3 Proceed to step 3 of Storing a specified
destination in the destination memory
starting on page 39.
Section
02
41
En