Using The High Pass Filter; Adjusting Source Levels; Setting Up The Video Player; Setting The Subtitle Language - Pioneer AVH-X7500BT Owner's Manual

Audio adjustments

Using the high pass filter

When you do not want low sounds from the subwoofer output frequency range to play
from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies
higher than those in the selected range are output from the front or rear speakers.
1. Press the home button to switch to the home display.
2. Touch the audio function key to open the audio menu.
3. Touch 4 or 6 next to the frequency to select cut-off frequency.
Off (off) – 50Hz – 63Hz – 80Hz – 100Hz – 125Hz
Only frequencies higher than those in the selected range are output from the front or
rear speakers.

Adjusting source levels

With SLA (source level adjustment), the volume levels of each source can be adjusted
to prevent significant differences between sources.
• Settings are based on the FM volume level, which remains unchanged.
1. Press the home button to switch to the home display.
2. Touch the audio function key to open the audio menu.
3. Compare the FM volume level with the level of the source you wish to adjust.
4. Touch Source Level Adjuster on the audio function menu.
5. Touch or to adjust the source volume.
Range: +4 to –4
Notes
• Source Level Adjuster is not available when FM is selected as the source.
• The MW/LW volume level can also be adjusted with this function.
• Video CD, CD, compressed audio, DivX, MPEG-1, MPEG-2 and MPEG-4 are automatically
set to the same source level adjustment volume.

Setting up the video player

Setting the subtitle language

You can set a desired subtitle language. When available, the subtitles will be displayed
in the selected language.
1. Press the home button to switch to the home display.
2. Touch the video setup key to open the video setup menu.
3. Touch Subtitle Language on the Video Setup menu.
A subtitle language menu is displayed.
4. Touch the desired language.
The subtitle language is set.
• If you have selected Others, refer to "When you select Others" on this page.
Notes
• If the selected language is not available, the language specified on the disc is displayed.
• You can also switch the subtitle language by touching the switch subtitle languages key
during playback.
• The setting made here will not be affected even if the subtitle language is switched during
playback using the switch subtitle languages key.

When you select Others

A language code input display is shown when Others is selected. Refer to "Language
code chart for DVD" on page 67.
* Touch 0 to 9 to input the language code.
• To cancel the entered numbers, touch C.
• To register the code, touch the following touch panel key.
Registering the code.

Setting the audio language

You can set the preferred audio language.
1. Press the home button to switch to the home display.
2. Touch the video setup key to open the video setup menu.
3. Touch Audio Language on the Video Setup menu.
An audio language menu is displayed.
39