Other Functions; Attenuating Audio Volume; Displaying The Clock; Setting The Time Display On Or Off - Pioneer ANH-P10MP Operation Manual

Other Functions

Attenuating audio volume

The attenuator lets you lower the volume level
quickly (by about 90%).
1 Press NEXT to until "ATT" appears.
2 Press ATT to turn the attenuator on.
"ATT" appears in the display.
Press ATT again to turn the attenuator off
and return to the original volume level.

Displaying the clock

You can turn the time display on or off.
Setting the time display on or
off
1 Press NEXT until "CLK" appears.
2 Press CLK and then press ON/OFF to
turn the time display on.
The light illuminates.
Press ON/OFF again to turn the time display
off.
If you press BAND/ESC and exit the time
mode, the time display will appear instead of the
source name.
The time display will also appear on the navi-
gation screen during route guidance. Refer to
Screen during route guidance on page 32.
Time Display
Note
If you do not operate the function within about 30
seconds, the display is automatically returned.

Off clock display

When the time display is turned on, the calen-
dar display appears with the time display
when sources and the feature demo are off.

Adjusting the brightness

Display brightness adjustment lets you adjust
the display for easier viewing when lighting
conditions change.
1 Press NEXT until "C.MENU" appears.
2 Press C.MENU and then press BRGHT
to select the brightness mode.
3 Press or to adjust the brightness.
Each press of or
the brightness.
"00" – "31" is displayed as the brightness is
increased or decreased.
Switching the dimmer
setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the vehicle's headlights are turned on.
You can switch the dimmer on or off.
1 Press NEXT until "C.MENU" appears.
2 Press C.MENU and then press DMMER
to select the dimmer mode.
increases or decreases
En
Section
13
97