Thank you for buying this What is navigation? ........12 Display and indicators ....... 29 Display and indicators ......36 Pioneer product ........3 Safety instructions ........12 Basic operation ......... 29 50-disc multi-CD player ......36 Introduction ..........3 Digitised area ..........
Initial settings menu operation .... 49 INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE Using reverse mode ........49 INSTALLED ON THE PIONEER PRODUCTS, YOU ARE AGREEING TO BE BOUND Using the feature demo ......49 Switching the auxiliary setting ....49 BY THE TERMS OF THIS AGREEMENT.
The Software and related documentation are provided to you “AS IS”. PIONEER AND Pioneer grants to you a non-transferable, non-exclusive license to use the software ITS LICENSOR(S) (for the purpose of provisions 2 and 3, Pioneer and its licensor(s) installed on the Pioneer products (the “Software”) and the related documentation shall be collectively referred to as “Pioneer”) MAKES AND YOU RECEIVE NO...
This is the entire Agreement between Pioneer and you regarding its subject matter. No purposes only. It may not accurately reflect the latest permissible routes, road change in this Agreement shall be effective unless agreed to in writing by Pioneer. If conditions, or traffic restrictions.
The RDS function operates only in areas with FM stations broadcasting RDS signals. The Pioneer CarStereo-Pass is for use only in Germany. Keep this manual handy as a reference for operating procedures and precautions. Always keep the volume low enough so you can hear sounds outside of the car.
Keep the front panel out of direct sunlight and high temperatures. Take care not to grip it tightly or drop it. When using with a Pioneer Navigation System, if you press , be sure the ACC OFF is selected. If ACC ON is selected, correct operation may not be possible even if you press...
MAN-ANH-P9R-GB.fm Page 8 Tuesday, June 4, 2002 1:39 PM This product features two demonstration modes. One is the reverse mode, the other is the feature demo mode. If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds.
Roll counterclockwise to lower the volume level. to return to the original volume level. External unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this product. Two external Navigation operations of the ANH-P9R cannot be performed even if the CD-SR100 is units can be controlled by this product, although “External”...
MAN-ANH-P9R-GB.fm Page 10 Tuesday, June 4, 2002 1:39 PM Here the “random play” function of the built-in CD player is used as an example to illustrate operation of the multifunction buttons. If SOURCE is pressed after having set the destination during navigation, the SOURCE display and navigation Press repeatedly until “FUNC”...
MAN-ANH-P9R-GB.fm Page 11 Tuesday, June 4, 2002 1:39 PM This product’s display features key Pressing immediately cancels the current menu or mode, and returns to guidance indicators. These light to the basic displays. indicate which of the buttons you can use. When you’re in When the source is the Tuner, TV tuner or DAB tuner and no menu or mode is selected, the function menu, audio menu or the pressing...
The unit can be switched to “AUDIO” by pressing the button. With the Pioneer ANH-P9R, the location is determined via the GPS receiver (GPS = The navigation menu is automatically displayed when navigation announcements Global Positioning System). The direction and distance from the destination is are given.
MAN-ANH-P9R-GB.fm Page 13 Tuesday, June 4, 2002 1:39 PM Before using the navigation, perform calibration and language definition referring to the Installation Manual. These are the basic steps necessary to operate the navigation. More advanced navigation operation is explained starting on this page. can be made by turning the rotary stick, and confirmed by pressing the button.
MAN-ANH-P9R-GB.fm Page 14 Tuesday, June 4, 2002 1:39 PM Letters which are already entered are displayed inversely. For the purpose of Select “DESTINATION” in the main navigation menu using the rotary stick and press support, the existing entry is displayed to confirm.
MAN-ANH-P9R-GB.fm Page 15 Tuesday, June 4, 2002 1:39 PM The road nearest to the entry appears in capital letters in the road selection list. Using the rotary stick, select “ROAD” and press the button to The scroll marks indicate that more confirm.
MAN-ANH-P9R-GB.fm Page 16 Tuesday, June 4, 2002 1:39 PM Letters which are already entered are displayed inversely. For the purpose of Using the rotary stick, select “POST CODE” in the route menu and press to confirm. support, the existing entry is displayed at the next centre to be reached.
MAN-ANH-P9R-GB.fm Page 17 Tuesday, June 4, 2002 1:39 PM Using the rotary stick, select “HOUSE NUMBER” in the route menu and press to confirm. Selection from Using the rotary stick, enter the house number for the destination road and press for more than 2 seconds to confirm the entry.
MAN-ANH-P9R-GB.fm Page 18 Tuesday, June 4, 2002 1:39 PM Using the rotary stick, select “ROUTE SETTINGS” in the route menu and press to confirm. It is not absolutely necessary to store a destination in the destination memory for route guidance. It saves repeated manual entry, if the destination is required at a later date. If selected, the program calculates the Select “SAVE DESTINATION”...
MAN-ANH-P9R-GB.fm Page 19 Tuesday, June 4, 2002 1:39 PM Select destination memory (see page 25). This function enables a stopover to be entered when route guidance is active. Select the destination to be deleted using the rotary stick and press the multifunction button.
MAN-ANH-P9R-GB.fm Page 20 Tuesday, June 4, 2002 1:39 PM is displayed inversely and the route is recalculated. Press the multifunction button Press the multifunction button To delete the stopover, press the button within 8 seconds. To delete a block, press the Route guidance to the final destination button within 8 seconds.
MAN-ANH-P9R-GB.fm Page 21 Tuesday, June 4, 2002 1:39 PM “Please follow the road”. This display tells you that you should After entering the destination (address), the system calculates the route and follow the course of the road. announces: “Ready to drive off”. The driving recommendations are given by voice messages and displays on the screen.
MAN-ANH-P9R-GB.fm Page 22 Tuesday, June 4, 2002 1:39 PM “Keep right after 2 kilometers”. “NEW ROUTE” appears on the display. In addition, there is a voice announcement “The route is being recalculated due to current traffic announcements”. Keeping to the right means that the road displayed inversely.
MAN-ANH-P9R-GB.fm Page 23 Tuesday, June 4, 2002 1:39 PM For inactive route guidance, the information menu can be requested by pressing the button. Press the button. Press the multifunction button The destination, the distance and the estimated time of arrival are displayed. A list of currently available traffic information is displayed.
MAN-ANH-P9R-GB.fm Page 24 Tuesday, June 4, 2002 1:39 PM The current position with road name (if During route guidance, press button. available), degrees of longitude and latitude and the number of satellites Press the multifunction button. received are displayed. By pressing the button, the program returns to the route guidance display.
MAN-ANH-P9R-GB.fm Page 25 Tuesday, June 4, 2002 1:39 PM Special destinations “LOCAL AREA” Special destinations in the current surrounding area of the vehicle or special destinations near the destination can be selected. Using the rotary stick, select “DEST. MEMORY” in the main navigation menu and press to confirm.
MAN-ANH-P9R-GB.fm Page 26 Tuesday, June 4, 2002 1:39 PM A list with special destinations is displayed or if there are more than 9 entries in the list, Using the rotary stick, select either you will be requested to enter text. country (ex.
MAN-ANH-P9R-GB.fm Page 27 Tuesday, June 4, 2002 1:39 PM The internal system clock can be set to local time. Using the multifunction button the time can be changed from the 24 hour to the 12 hour display. The current position can be saved and stored in the destination memory. Language setting for the navigation system.
MAN-ANH-P9R-GB.fm Page 28 Tuesday, June 4, 2002 1:39 PM It is possible to select between Request the destination memory (see page 25) and select destination using the rotary ANNOUNCEMENT ETA “ON” and stick. “OFF” by briefly pressing the If the position is outside a digitised area, the driver is guided to the digitised route button.
MAN-ANH-P9R-GB.fm Page 29 Tuesday, June 4, 2002 1:39 PM If you press any of the buttons 1 – 6, you can easily store up to six broadcast stations > for later recall. Press until “1” – “6” appears. The station is stored in memory under the selected button. Up to 18 FM stations, six for each of the three FM bands, and six MW/LW stations can be stored in memory.
MAN-ANH-P9R-GB.fm Page 30 Tuesday, June 4, 2002 1:39 PM BSM (best stations memory) lets you automatically store the six strongest broadcast > stations under the buttons 1 – 6. “Searching” appears. The six strongest broadcast stations will be stored under the buttons 1 –...
MAN-ANH-P9R-GB.fm Page 31 Tuesday, June 4, 2002 1:39 PM If you are listening to a broadcast and the reception becomes weak or there are other When AF is used to automatically retune frequencies, the regional function limits the problems, this product will automatically search for a different station in the same selection to stations broadcasting regional programs.
MAN-ANH-P9R-GB.fm Page 32 Tuesday, June 4, 2002 1:39 PM The system switches back to the original source following traffic announcement reception. The TA function can be activated from sources other than the tuner if the tuner was last set A PTY search is performed by program type as indicated in the PTY list (the program to the FM band but not if it was last set to the MW/LW band.
MAN-ANH-P9R-GB.fm Page 33 Tuesday, June 4, 2002 1:39 PM This tuner can display radio text data transmitted by RDS stations, such as station information, the name of the currently broadcast song and the name of the artist. News & Inf News News Affairs Current affairs...
MAN-ANH-P9R-GB.fm Page 34 Tuesday, June 4, 2002 1:39 PM Be sure to close the front panel after removing the CD. Ä > You can select CD as the source by pressing when an audio disc is loaded in this product. When the front panel is open, multi-function buttons are not available.
MAN-ANH-P9R-GB.fm Page 35 Tuesday, June 4, 2002 1:39 PM Scan play lets you hear the first 10 seconds of each track on the CD. The built-in CD player function menu has the following functions: The light illuminates. The first 10 seconds of each track are played. When the scan mode is exited while scan play is on, “SCAN”...
MAN-ANH-P9R-GB.fm Page 36 Tuesday, June 4, 2002 1:39 PM Pause lets you temporarily stop playback of the CD. > The light illuminates. Play of the current track pauses. Press again to turn the pause off. When the pause mode is exited while pause is on, “PAUSE” is displayed in the basic display.
MAN-ANH-P9R-GB.fm Page 37 Tuesday, June 4, 2002 1:39 PM You can use the buttons – – ) to select a disc directly. The multi-CD player function menu has the following functions: Press until “1” – “6” (or “7” – “12”) appears. If you do not operate the function within about 30 seconds, the display is automatically returned.
MAN-ANH-P9R-GB.fm Page 38 Tuesday, June 4, 2002 1:39 PM Random play lets you play back tracks in random order within the repeat range: multi- The track title list lets you see the list of track titles on a CD TEXT disc and select one CD player repeat and disc repeat.
MAN-ANH-P9R-GB.fm Page 39 Tuesday, June 4, 2002 1:39 PM Press to move backwards in the display. Pause lets you temporarily stop playback of the CD. The light illuminates. Play of the current track pauses. When playing a CD TEXT disc on a CD TEXT compatible multi-CD player, if you switch to Press again to turn pause off.
MAN-ANH-P9R-GB.fm Page 40 Tuesday, June 4, 2002 1:39 PM When you want to erase a track from ITS memory, you can do so when ITS play is on. The ITS (instant track selection) lets you make a program of favorite tracks from those in the multi-CD player magazine.
MAN-ANH-P9R-GB.fm Page 41 Tuesday, June 4, 2002 1:39 PM EXTRA The currently received service has a secondary service component. The currently received service has a dynamic label. This product does not have the language filter function. When DAB reception is possible. With this product, you can operate three additional functions: available service list, available PTY search, storing and recalling dynamic label.
MAN-ANH-P9R-GB.fm Page 42 Tuesday, June 4, 2002 1:39 PM Press repeatedly to switch between the following bands: DAB 1 – DAB 2 – DAB 3 Press until “D.TEXT” appears. Press repeatedly to switch between the following displays: Pressing switches between the four dynamic label data displays. SERVICE (service label) and COMPONENT (service component label) –...
MAN-ANH-P9R-GB.fm Page 43 Tuesday, June 4, 2002 1:39 PM The DAB tuner function menu has the following functions: For operation of the announcement support, refer to “Setting the announcement support interruption” on this page. > You can also use to select and recall the desired service. For operation of the preset service list, refer to “Selecting services from the preset service list”...
MAN-ANH-P9R-GB.fm Page 44 Tuesday, June 4, 2002 1:39 PM Available PTY search lets you see the list of available PTYs that is in the current ensemble and select one of them to receive. With this product, you can operate preset channel list as one additional function. Available PTY search function is different from PTY search function.
MAN-ANH-P9R-GB.fm Page 45 Tuesday, June 4, 2002 1:39 PM The station is stored in memory under the selected button. The preset channel list lets you see the list of preset channels and select one of them to receive. Up to 12 stations can be memorized in one band. This product allows you to store and recall directly using preset channels 7 –...
MAN-ANH-P9R-GB.fm Page 46 Tuesday, June 4, 2002 1:39 PM There are seven stored equalizer curves which you can easily recall at any time. Here The audio menu has the following is a list of the equalizer curves: functions: If you do not operate the function within about 30 seconds, the display is automatically returned.
MAN-ANH-P9R-GB.fm Page 47 Tuesday, June 4, 2002 1:39 PM You can adjust the cut-off frequency and the Treble level. modes, treble adjustment affects only the front output: rear Press until the desired frequency appears in the display. output cannot be adjusted. 40 –...
MAN-ANH-P9R-GB.fm Page 48 Tuesday, June 4, 2002 1:39 PM This unit is equipped with a subwoofer output which can be switched on or off. When Each press of increases or decreases the source volume. “+4” – “–4” is a subwoofer is connected to the rear output, first, switch the rear output setting to displayed as the source volume is increased or decreased.
MAN-ANH-P9R-GB.fm Page 49 Tuesday, June 4, 2002 1:39 PM The feature demo automatically starts when power to this product is switched off while The initial settings menu has the the ignition switch is set to ACC or ON. following functions: You can turn the feature demo on or off.
MAN-ANH-P9R-GB.fm Page 50 Tuesday, June 4, 2002 1:39 PM This setting controls whether the volume of the Head Unit is automatically muted The warning tone sounds to remind you to detach the front panel. (Refer to page 7.) during voice guidance. You can turn the warning tone function on or off.
MAN-ANH-P9R-GB.fm Page 51 Tuesday, June 4, 2002 1:39 PM When a hide-away DAB tuner (e.g., GEXP700DAB) is connected, you can set the The attenuator lets you lower the volume level quickly (by about 90%). product in this mode so that a traffic information interruption from the hide-away DAB tuner takes precedence over this product’s RDS traffic announcement (TA) function.
MAN-ANH-P9R-GB.fm Page 52 Tuesday, June 4, 2002 1:39 PM Display brightness adjustment lets you adjust the display for easier viewing when An IP-BUS-RCA interconnector such as the CD-RB20 or CD-RB10 (sold separately) lighting conditions change. lets you connect this product to auxiliary equipment featuring RCA output. For more details, refer to the IP-BUS-RCA interconnector's owner's manual.
If the error cannot be If the heater is used in cold weather, moisture may form on components inside the corrected, contact your dealer or your nearest Pioneer Service Center. CD player. Condensation may cause the CD player to not operate properly. If you...
htrÃ8hrÃ6pv This product may not be able to receive traffic information in some areas. Pioneer does not bear responsibility for the accuracy of the information xÃ Power source ..........14.4 V DC Maximum power output ......... 50 W transmitted.
MAN-ANH-P9R-GB.fm Page 55 Tuesday, June 4, 2002 1:39 PM System ......Compact disc audio system Usable discs ........... Compact disc Signal format: Sampling frequency ....... 44.1 kHz Number of quantization bits ....16; linear Frequency characteristics ..5 – 20,000 Hz (±1 dB) Signal-to-noise ratio ......
MAN-ANH-P9R-GB reserved. rights Corporation. Pioneer 2002 Copyright Belgium Printed Corporation. Pioneer Published 55-5688-52-90 TEL: 03100 C.P. D.F. Mexico, Valle Col. Desp. Piso 3er. 1009 Lorenzo C.V. S.A. MEXICO, ELECTRONICS PIONEER 479-4411 (905) TEL: Canada OP2, Ontario Markham, Parkway, Allstate INC.