Route Guidance; Calculating The Route - Pioneer ANH-P10MP Operation Manual

Navigation

Route guidance

When you select "START-" on the route menu,
the route calculation starts. When the calcula-
tion ends, the navigation system starts giving
route guidance.

Calculating the route

1 On the route menu, select "START-".
The route calculation starts.
Route calculation may take several seconds.
During route calculation,
display and the message "CALC. ROUTE" is
displayed on the right. Driving off should be
delayed until no longer flashes.
Once the calculation has been completed,
disappears and the navigation announces:
"Ready to drive off". Refer to Screen during
route guidance on page 32.
Note
Once the calculation has been completed, you
can remove the navigation CD and insert an au-
dio CD. Refer to Using navigation and audio
sources simultaneously on page 19.
flashes on the
When a route is calculated, the route and
voice guidance for the route is automatically
set. Also, for day or time traffic regulations,
only information about traffic regulations at
the time when the route was calculated is
shown. For example, if a street is open dur-
ing the morning only, but you arrive later, it
would be against the traffic regulations so
you cannot drive along the set route. When
driving, please follow the actual traffic
signs. Also, the system may not know some
traffic regulations.
Section
02
31
En