Frequency Transferring; Memory Names; Calling Up Memory Names; Editing Memory Names - Icom IC-706MKIIG Instruction Manual

5
MEMORY AND SCAN OPERATION
I
The frequency and operating mode can be trans-
ferred from memory mode to VFO mode.
➀
Select VFO mode with [
play.
➁
Select a memory channel with [M-CH].
•Select memory mode to confirm the memory channel's
contents, if desired; then return to VFO mode.
• "}" appears if the selected memory channel is a
blank channel (and does not have contents). In this
case transferring is not possible.
➂
Push [
(F-2)
cy and operating mode.
•Transferred frequency and operating mode appear in
the display.
• " " does not appear in memory mode.
I
All memory channels (including scan edges and the
call channel) can be tagged with alphanumeric names
of up to 9 characters each.
•
➀
Select the
➥ Push [DISPLAY] 1 or 2 times to select .
➥ Push [MENU] one or more times to select the
display.
➁
Select a memory channel with [M-CH].
•
➀
Call up the desired memory (channel) name as
above.
➁
Push [ ] to enter memory name edit mode.
(F-3)
•"
appears under the first character position.
➂
Rotate the main dial to select the desired charac-
ter, then advance the cursor position.
•[ ] increments the cursor position; [
(F-3)
ments the cursor position.
• [(F-2)] overwrites the character with a space.
➃
Repeat this procedure until all desired characters
have been selected.
➄
Push [
(MENU)
•The display reappears and the programmed memo-
ry name is displayed.
41
] in the
(F-3)
] for 2 sec. to transfer the frequen-
display.
" appears briefly, then a flashing cursor
(F-1)
] to exit memory name edit mode.
dis-
[EXAMPLE]: Transferring contents of memory 16.
Operating frequency:
Contents of memory 16: 14.020 MHz/CW
USB
USB
CW
All common keyboard characters (ASCII characters 33
to 126) can be used, including numerals and punctua-
tion marks.
] decre-
21.320 MHz/USB (VFO)
M-CH SHIFT
VFO A
CH
VFO A
CH
F-2
VFO A
CH
SPLIT
Push for
2 sec.
F-3
F-3
F-3
MENU