Icom IC-706MKIIG Instruction Manual page 55

When this item is set to ON, pushing [
sets the undisplayed VFO frequency to the dis-
played VFO frequency plus the split offset or duplex
offset, and activates split operation.
When this item is ON the main dial can be used to
adjust the transmit frequency (
lock function is activated.
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
Note that this setting is not valid in FM/WFM modes.
This item sets the offset for the duplex function
when operating on the HF bands.
This item sets the offset for the duplex function
when operating on the 50 MHz band.
This item sets the offset for the duplex function
when operating on the 144 MHz band.
This item sets the offset for the duplex function
when operating on the 430 MHz band.
This item sets the offset direction when using the
one-touch repeater function. +duplex or –duplex
can be selected.
] for 2 sec.
Quick split function ON
(default).
) even while the
Split lock function OFF
(default)
Default is 0.100 MHz.
Default is 0.100 MHz.
Default is 0.500 MHz.
Default is 0.600 MHz.
Default is 5.000 MHz.
DUP
Duplex direction is set
to –duplex.
SET MODE
Quick split function OFF.
Split lock function ON
DUP
Duplex direction is set to
+duplex.
7
52