D Receiving A Status Message - Icom IC-F6062D Operating Manual

2
BIIS 1200 OPERATION

D Receiving a status message

q When a status message is received:
• Rings sound.
• The calling station's ID (or name) and the status message blink.
The received
status message
w Push [Moni (Audi)] to return to the stand-by mode.
NOTE: When the display mode is 1 line
If the 'Scroll Timer' item is set to "OFF," even when a status
message is received, only the calling station's ID (or name)
is displayed (no message is alternately displayed). In that
case, push [Status Down] to display the status message
manually.
5
R X S t a t u s
1 2 3 4
Calling station's ID
D Receiving an SDM
q When an SDM is received:
• Rings sound.
• " " appears.
• The calling station's ID (or name) and the SDM blink.
0 1
The received
SDM
NOTE: When the SDM includes more than 12 charac-
ters, it automatically scrolls.
• Push [Status Up] or [Status Down] to stop scrolling, or
manually scroll the message.
w Push [Moni (Audi)] to return to the stand-by mode.
S D M 8
Calling station's ID
R E T U R N T O
1 2 3 4
Appears
1 2 3 4
O F F I C E
Scrolls