Icom IC-F6062D Operating Manual page 24

3
dPMR OPERATION
D Transmitting an SDM
You can send a pre-programmed SDM to an individual station
or to group stations.
The transceiver has 10 memories to store messages.
q Push [dPMR Button] to enter the ID selection mode.
• The pre-programmed ID is displayed.
w Push [CH Up] or [CH Down] to select a desired Individual
ID or Talkgroup ID.
e Push [dPMR Button] again to enter the application selec-
tion mode.
• "STATUS" is displayed.
r Push [CH Up] or [CH Down] to select "MESSAGE."
t Push [dPMR Button] again to enter the SDM selection
mode.
• " " appears.
• The pre-programmed SDM is displayed.
y Push [CH Up] or [CH Down] to select a desired SDM.
• You can edit or change the contents of the SDM. See the next
page for details.
M E S S A G E
M e s s a g e
21
Appears
0 1
1
An SDM is displayed.
u Push [Call] to transmit the SDM to the selected station or
talkgroup.
• "WAIT" is displayed while transmitting.
• "OK" is displayed when an acknowledgement is received.
• "FAILED" is displayed when no acknowledgment is received.
i After a specified time period, the transceiver will return to
the stand-by mode.