D Receiving A Group Call - Icom IC-F6062D Operating Manual

D Receiving a Group call

q When a Group call is received:
• Rings sound.
• " " appears and the mute is released.
• " " appears or blinks, depending on the pre-programmed set-
tings.
• The group ID (or name) and the calling station's ID (or name)
blink.
Appears Appears or blinks
Group ID Calling station's ID
w While holding down [PTT], speak into the microphone at
your normal voice level.
NOTE: Only one station is allowed to speak at the same
time.
e Release [PTT] to receive.
r After the communication is finished, push [Moni (Audi)] to
send a 'Clear down' signal to terminate the connection.
• Either station can send a 'Clear down' signal.
• " " disappears, "CLR DOWN" appears for approximately 2
seconds, and the transceiver automatically returns to the
stand-by mode.
4 0 0 1
1 2 3 4
BIIS 1200 OPERATION
D Receiving an Emergency call
q When an Emergency call is received:
• Rings sound.
• "Emergency" and the calling station's ID (or name) blink.
• The transceiver automatically transmits an acknowledgement to
the calling station.
E m e r g e n c y
w Push [Moni (Audi)] to return to the stand-by mode.
2
1 1 1 1
Calling station's ID
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4