Horn Output; Printer Connection; Dpmr Operation - Icom IC-F6062D Operating Manual
Biis 1200/dpmr operation
Hide thumbs
Also See for IC-F6062D:
- Instruction manual (32 pages) ,
- Instructions (2 pages) ,
- Instruction manual (9 pages)
Table of Contents
Advertisement
3
dPMR OPERATION
■ Horn output
When a horn is connected to the D-Sub 25-pin connector of
the transceiver, the Automatic Honking function is usable, de-
pending on the pre-programmed settings.
When a status message is received, the transceiver controls
the vehicle's horn to sound an alert for the pre-programmed
time period.
This function is useful when you are away from the trans-
ceiver.
Ask your dealer or system operator for connection and set-
ting details.
27
■ Printer connection
When a printer is connected to the D-sub 25-pin connector of
the transceiver, received SDM and the calling station's ID can
be printed out, depending on the pre-programmed settings.
Ask your dealer or system operator for connection and set-
ting details.
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-F6062D and is the answer not in the manual?
Questions and answers