Related Manuals for Icom IC-F5010 series
Summary of Contents for Icom IC-F5010 series
- Page 1 Limited functions only INSTRUCTION MANUAL VHF MOBILE TRANSCEIVERS iF5010 Series UHF MOBILE TRANSCEIVERS iF6010 Series...
-
Page 2: Explicit Definitions
If disregarded, inconvenience only. No risk NOTE of personal injury, fire or electric shock. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United King- CAUTION: Changes or modifications to this transceiver, dom, Germany, France, Spain, Russia and/or other countries. -
Page 3: Precautions
Other microphones performance when used with an Icom transceiver. have different pin assignments and may damage the trans- Icom is not responsible for the destruction or damage to an ceiver. Icom transceiver in the event the Icom transceiver is used with... -
Page 4: Table Of Contents
TABLE OF CONTENTS IMPORTANT ................i 3 CONNECTION AND MAINTENANCE ....14–16 EXPLICIT DEFINITIONS ............i ■ Rear panel connection ..........14 FCC INFORMATION ............. i ■ Supplied Accessories ..........15 PRECAUTIONS ..............ii ■ Mounting the transceiver ..........15 TABLE OF CONTENTS ............iii ■... -
Page 5: Panel Description
PANEL DESCRIPTION ■ Front panel Function LED (p. 2) Speaker TX/RX q AF VOLUME CONTROL KNOB [VOL] r POWER KEY [ ] Rotate the knob to adjust the audio output level. Push to turn the power ON or OFF. • Minimum audio level is pre-set. (p. 10) •... -
Page 6: Function Led
PANEL DESCRIPTION ■ Function LED D MICROPHONE The supplied or optional microphone has a PTT switch and a hanger hook. • The following functions are available when the microphone is ON or OFF hook (depending on the preprogramming): - Automatic scan start when you put it ON hook. TX/RX - Scan is cancelled when you take it OFF hook - Scan is paused when you take it OFF hook... -
Page 7: Programmable Function Keys
[P3] programmable function keys. ➥ To rewrite the operating channel as Priority A or Priority Consult your Icom dealer or system operator for details con- B, hold down [Prio A (Rewrite)] or [Prio B (Rewrite)] for cerning your transceivers programming. - Page 8 PANEL DESCRIPTION ■ Programmable function keys (continued) LOCK KEY DTMF AUTODIAL KEY Hold down to electronically lock all programmable keys ex- Push to transmit a DTMF code. cept the following: RE-DIAL KEY [Moni(Audi)], [Lock], [Call] (incl. Call A and Call B), [Emer- Push to transmit the last-transmitted DTMF code.
- Page 9 PANEL DESCRIPTION SURVEILLANCE KEY USER SET MODE KEY Push to turn the surveillance function ON or OFF. ➥ Hold down for 1 second to enter the User Set mode. When this function is turned ON, the beeps do not sound •...
-
Page 10: Panel Description
PANEL DESCRIPTION ■ Programmable function keys (continued) Ext. CH Sel Mode KEY Push to turn the Ext. CH Select function ON or OFF. When the function is turned ON, memory channels can be selected with external input operation only. When the function is turned OFF, memory channels can be selected with [CH Up] or [CH Down] operation, or with exter- nal input operation. -
Page 11: Basic Operation
BASIC OPERATION ■ Turning ON the power ■ Channel selection q Push [ ] to turn ON the power. There are several methods to select channels, and they may w If the transceiver is programmed for a start up password, differ, according to your system set up. -
Page 12: Call Procedure
BASIC OPERATION ■ Call procedure ■ Receiving and transmitting Receiving: When your system employs tone signaling (excluding CTCSS and DTCS), a call procedure may be necessary prior to voice q Hold down [ ] for 1 second to turn ON the power. transmission. -
Page 13: D Transmitting Notes
BASIC OPERATION D Transmitting notes D DTMF transmission • Transmit inhibit function If the transceiver has [DTMF Autodial] assigned to it, the au- The transceiver has several inhibit functions which restrict tomatic DTMF transmission function can be used. transmission under the following conditions: - The channel is muted (‘Inaudible’... -
Page 14: User Set Mode
BASIC OPERATION ■ User Set mode • Lighting combination of two indicators to show the se- If the transceiver has [User Set Mode] assigned to it, you can lected item “customize” the transceiver operation to suit your preferences and operating style. Channel Activated Item... -
Page 15: Scrambler Function
BASIC OPERATION ■ Scrambler function ■ Priority A channel selection The Voice Scrambler function provides private communica- When one of the following operations is performed, the trans- tion between stations. ceiver automatically selects the Priority A channel. The optional Rolling or Non-rolling type can be used. •... -
Page 16: Emergency Transmission
BASIC OPERATION ■ Emergency transmission D NOTES When [Emergency] is held down for the specified time pe- riod*, the emergency signal is transmitted on the specified Depending on the preprogramming, the following functions emergency channel once, or repeatedly. are automatically activated. Ask your dealer for details. When no emergency channel is specified, the call is transmit- ted on the operating channel. -
Page 17: Mdc 1200 System Operation
BASIC OPERATION ■ MDC 1200 system operation The MDC 1200 signaling system enhances your transceiver’s capabilities with PTT ID* and Emergency signaling. * When [PTT] is pushed and/or released, the transceiver transmits its own station ID. D Transmitting an Emergency Call The MDC 1200 system’s Emergency feature can be ac- cessed using the [Emergency] key (p. -
Page 18: Connection And Maintenance
CONNECTION AND MAINTENANCE ■ Rear panel connection q ANTENNA CONNECTOR e MICROPHONE HANGER Antenna Connect to an antenna. Ask your Connect the supplied micro- dealer about antenna selection phone hanger to the vehicle’s ground for microphone on/off and placement. hook functions. (See page 2) w EXTERNAL SPEAKER JACK Optional speaker Connect to a 4 to 8 ø... -
Page 19: Supplied Accessories
CONNECTION AND MAINTENANCE ■ Supplied Accessories ■ Mounting the transceiver The universal mounting bracket supplied with your trans- Microphone Microphone hanger Microphone ceiver also allows overhead mounting. and screw set hanger cable • Mount the transceiver securely with the 4 supplied screws to a thick surface which can support more than 1.5 kg (3.3 lb). -
Page 20: Antenna
CONNECTION AND MAINTENANCE ■ Antenna ■ Options • OPC-1132A/OPC-347 A key element in the performance of any communication sys- dc power cable tems is the antenna. Contact your dealer for more information 2 fuse holders are attached. USE only a 20 A fuse. regarding antennas and how to install them. -
Page 21: Safety Training Information
SAFETY TRAINING INFORMATION 3. IC-F5011/IC-F5013H: Your Icom radio generates RF electromagnetic en- Transmit only when people outside the vehicle are at least the ergy during transmit mode. This radio is designed recommended minimum distance of 100 centimeters away from for and classified as “Occupational Use Only”, the properly installed antenna. - Page 22 Electromagnetic Interference/Compatibility timètres de toute personne pendant le fonctionnement. Dans le During transmissions, your Icom radio generates RF energy that pire des cas, pour un petit véhicule, l'antenne doit être placée sur can possibly cause interference with other devices or systems. To le toit, n'importe où...
-
Page 23: Safety Training Information
Interférence électromagnétique et compatibilité En mode de transmission, votre radio Icom produit de l'énergie de RF qui peut provoquer des interférences avec d'autres appareils ou systèmes. Pour éviter de telles interférences, mettez la radio hors tension dans les secteurs où... - Page 24 A-6902H-1EX-w Printed in Japan © 2010–2012 Icom Inc. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan Printed on recycled paper with soy ink.
Need help?
Do you have a question about the IC-F5010 series and is the answer not in the manual?
Questions and answers