Receiving A Message; D Receiving A Status Message - Icom IC-F5060 Series Operating Manual

■ Receiving a message

D Receiving a status message

q When a status message is received:
• Beeps sound.
• The status message and the calling station ID (or text) is dis-
played when the display mode is 2 lines, as shown below.
• When the display mode is 1 line, the status message and the
calling station ID (or text) may be alternately displayed depend-
ing on the setting.
R X S t a t u s
w Push [Moni (Audi)] to return to the standby mode.
NOTE: When the display mode is 1 line
Only the calling station ID (or text) is displayed (no message
is alternately displayed) when the scroll timer is set to 'OFF.'
In this case, push [Status Up]/[Status Down] to manually
display the status message.
0 1
1 2 3 4
BIIS 1200 OPERATION
D Receiving an SDM (Short Data Message)
q When an SDM is received:
• Beeps sound.
• " " appears.
• The SDM and the calling station ID (or text) may be displayed
when the display mode is 2 lines, as shown below.
• The SDM and the calling station ID (or text) is alternately dis-
played when the display mode is 1 line, depending on the pre-
setting.
S D M 8
NOTE: When the received SDM includes more than 12
characters, the message automatically scrolls when the
automatic scroll function is activated.
• Push [Status Up]/[Status Down] to manually scroll the mes-
sage.
S D M 1 2 3 4 5 6 7 8
w Push [Moni (Audi)] to return to the standby mode.
2
Appears
1 2 3 4
Appears
1 2 3 4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8