D Receiving A Status Message - Icom IC-F3262DT Operating Manual

2
BIIS 1200 OPERATION
■ Receiving a call (continued)

D Receiving a status message

When a status message is received:
q
• Rings sound.
• The calling station's ID (or name) and the status message blink.
RX Status 01
BIIS CALL TXCE MON
[Moni (Audi)] to return to the stand-by mode.
Push
w
NOTE: When the display mode is one line
If the 'Scroll Timer' item is set to "OFF," even when a sta-
tus message is received, only the calling station's ID (or
name) is displayed (no message is alternately displayed).
In that case, push [Status Down] to display the status
message manually.
5
The received
status message
1234
Calling station's ID
D Receiving an SDM
When an SDM is received:
q
• Rings sound.
• The calling station's ID (or name) and the SDM blink.
Message 1
1234
BIIS CALL TXCE MON
NOTE: When the SDM includes more than 12 charac-
ters, it automatically scrolls.
• Push [Status Up] or [Status Down] to stop scrolling, or
manually scroll the message.
• " " appears.
RETURN TO
1234
BIIS CALL TXCE MON
Push [Moni (Audi)] to return to the stand-by mode.
w
The received SDM
Calling station's ID
OFFICE
Scrolls