Set Mode; Set Mode ProgrammNg - Icom IC-M411 Instruction Manual

n Set mode programming
Set mode s used to change the condtons of the trans-
cever's functons: Scan type, Scan resume tmer, Dual/Tr-
watch, Operaton beep, LCD backlght, LCD contrast, AF
level adjustment and Favorte channel.
Avalable functons may dffer dependng on dealer set-
tng.
D SET MODE CONSTRUCTION
• Favorite channel
Scrolls
• AF level
adjustment
q T urn power OFF.
w Whle pushng [16•C], turn power ON to enter Set mode.
e After the dsplay appears, release [16•C].
r Push [16•C] to select the desred tem, f necessary.
t P ush [Y] or [Z] to select the desred condton of the
y Turn power OFF, then ON agan to ext Set mode.
• Scan type
Starting item
• To enter Set mode: While pushing
• To select the item: Push
• To exit Set mode: Turn power OFF, then ON again.
• LCD Contrast
Scrolls

SET MODE

• "SCAN" appears at the channel comment ndcator.
tem.
• Scan resume
timer
, turn power ON.
. ( )
• LCD Backlight
Scrolls
7
1
2
3
4
5
6
7
8
• Dual/Tri-watch
9
10
11
12
13
14
15
16
• Operation beep
39