Icom IC-M411 Instruction Manual page 36

6
DSC OPERATION
D Test Call
Testng on the exclusve DSC dstress and safety callng chan-
nels should be avoded as much as possble by usng other
methods. When testng on the dstress/safety channel s una-
vodable, t should be ndcated that these are test transmssons.
Normally the test call would requre no further communca-
tons between the two statons nvolved.
q Push [MENU] to enter the DSC menu.
w Push [s] or [t] to select "TEST CALL," and push [ENT].
e Push [Y] or [Z] to select the desred pre-programmed
coast staton address, push [ENT].
• The ID code must be set n advance. (p. 14)
• After pushng [ENT], Channel 70 s automatcally selected and
"READY" appears at the channel comment ndcator.
Push
30
r Push [ENT] to transmt the Test call.
• If Channel 70 s busy, the transcever stands by untl the chan-
nel becomes clear.
t After the Test call has been transmtted, returns to the
normal operaton.
Scrolls
Scrolls
Transmitting
Scrolls