OptOnal Mb-69 NstallatOn - Icom IC-M411 Instruction Manual

n Optional MB-69 installation
An optonal MB-69
flush mount
the transcever to a flat surface such as an nstrument panel.
CAUTION: KEEP the transcever and mcrophone at least
1 meter away from your vessel's magnetc navgaton
compass.
q Usng the template on p. 53, carefully cut a hole nto the
nstrument panel (or wherever you plan to mount the
transcever.)
w Slde the transcever through the hole as shown below.
s avalable for mountng
CONNECTIONS AND MAINTENANCE
e Attach the clamps on ether sde of the transcever wth 2
suppled bolts (5 × 8 mm).
• Make sure that the clamps algn parallel to the transcever body.
r Tghten the end bolts on the clamps (rotate clockwse) so
that the clamps press frmly aganst the nsde of the n-
strument control panel.
t Tghten the lockng nuts (rotate counterclockwse) so that
the transcever s securely mounted n poston as below.
y Connect the antenna and power cable, then return the
nstrument control panel to ts orgnal place.
r
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
t
45