D Transmitting A Group Call - Icom IC-M411 Instruction Manual

6
DSC OPERATION

D Transmitting a Group call

The Group call functon allows you to transmt a DSC sgnal
to a specfic group only.
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select "GROUP," push [ENT].
e Push [Y] or [Z] to select the desred pre-programmed
Group address, push [ENT].
• The ID code must be set n advance. (p. 15)
r Push [Y] or [Z] to select the desred ntershp channel,
push [ENT].
• Intershp channels are already preset nto the transcever n
recommendng order.
• After pushng [ENT], Channel 70 s automatcally selected and
"READY" appears at the channel comment ndcator.
24
Push
t Push [ENT] to transmt the Group call.
• If Channel 70 s busy, the transcever stands by untl the chan-
nel becomes clear.
• Routne category only s avalable.
Transmitting
y After the Group call has been transmtted, the specfed
channel (n step r) s automatcally selected.
After transmitting 'ABLE' ACK
u Push and hold [PTT] to communcate your message to
the respondng shp.
Scrolls