D Transmitting A Group Call - Icom IC-M92D Instruction Manual

1
CHAPTER_CONTINUED
D Transmitting a Group call
The Group call function allows you to transmit a DSC signal
to only a specific group.
Enter "GROUP CALL" in the DSC CALLS menu.
q
➪
MENU
(Push [MENU])
Select the desired preprogrammed group address or
w
"Manual Input," using [Y]/[Z], then push [ENT].
• The ID code for the Group call can be set first. (p. 20)
• When "Manual Input" is selected, set the 8 digit ID code for the
group you wish to call.
Select a desired intership channel using [
e
then push [ENT].
• Intership channels are already preset into the transceiver in the
recommended order.
31
DSC Calls ➪ Group Call
(Push [Y]/[Z], then push [ENT].)
Y](CH)/[Z](CH),
About Manual Inputting:
Enter a desired group ID in the following way:
• Select a desired number using [Y]/[Z]/[Ω]/[≈].
• Push [ENT] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT].
• The first digit is specified as '0' for a Group ID.
• The first two digits are '0' for any Coast station ID.
A confirmation screen appears.
r
• Confirm the call contents.