Transmitting A Group Call - Icom iM323 Instruction Manual

7
DSC OPERATION

Transmitting a Group call

D
The Group call function allows you to transmit a DSC signal
to only a specific group.
Enter "GROUP CALL" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU])
Select the desired preprogrammed group address or "Man-
w
ual Input," using Dial or [Y]/[Z], then push Dial or [ENT].
• The ID code for the Group call can be set irst. (p. 20)
• When "Manual Input" is selected, set the 8 digit ID code for the
group you wish to call.
•Push [EXIT] to return to the normal operating mode.
•Push [BACK] to return to the previous screen.
32
➪ Group Call
(Rotate Dial, then push [ENT].)
Select a desired intership channel using Dial or [
e
[Z](CH), then push [ENT].
• Intership channels are already preset into the transceiver in the
recommended order.
About Manual Inputting:
Enter a desired group ID in the following way:
• Select a desired number using Dial, or [Ω]/[≈].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT] or Dial.
• The irst digit is speciied as '0,' and the second digit is other than
'0' for a Group ID.
• The irst two digits are '0' for any Coast station ID.
Y](CH)/