D Transmitting A Group Call - Icom IC-M423 Instruction Manual

Manual ACK:
Enter "INDIVIDUAL ACK" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU]) (Rotate Dial, then push [ENT].)
• When no Individual call has been received, "Individual ACK" item
will not be displayed.
Select a desired individual address or ID code to reply to,
w
using Dial or [Y]/[Z], then push [ENT].
Perform steps e to u, as described in "Quick ACK:," be-
e
ginning on the previous page.
➪ Individual ACK
D Transmitting a Group call
The Group call function allows you to transmit a DSC signal
to only a specific group.
Enter "GROUP CALL" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU]) (Rotate Dial, then push [ENT].)
Select the desired preprogrammed group address or "Man-
w
ual Input," using Dial or [Y]/[Z], then push Dial or [ENT].
• The ID code for the Group call can be set first. (p. 21)
• When "Manual Input" is selected, set the 8 digit ID code for the
group you wish to call.
Select a desired intership channel using Dial or [
e
[Z](CH), then push [ENT].
• Intership channels are already preset into the transceiver in the
recommended order.
7
DSC OPERATION
➪ Group Call
Y](CH)/
+ Continued on the next page.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32