Fitting The Cutting Head - Husqvarna Rider 112C Operator's Manual

4 Check that the lever for setting the cutting height is in the
S position.
5 Put the lifting lever in the mowing position.
6 Release the clip and lift off the belt guard.
7 Disengage the spring for the drive belt tensioning wheel.
8 Lift of the drive belt.
9 Grab the upper pipe construction of the deck and pull it
out.
10 Lift off the deck and lean it against the machine or a wall.
Maintenance

Fitting the cutting head

1 Push the cutting deck in and make sure the guide bolts fit
into the grooves on the deck frame, one on each side.
2 Fit the cutting deck's pipe together with the deck frame's
pipe.
3 Grip the front edge of the deck and slide it in.
4 Push the deck until you feel the pipes touch bottom.
5 Fit the belt according to the picture.
– 23
English