Download  Print this page

Seat; Fueling; Release Lever - Husqvarna Rider 112C Operator's Manual

Hide thumbs

Advertisement

Lift up the cutting unit before adjusting the height.

Seat

The seat has a jointed attachment on the front edge and can
be tipped forward.
The seat can also be adjusted lengthways.
Loosen the bolts under the seat and adjust it forwards or
backwards to the desired position.

Fueling

The engine runs on unleaded petrol with a minimum octane
rating of 85 (not mixed with oil). We recommend the use of
biodegradable alkylate petrol. Do not use petrol that contains
methanol.
Do not fill the tank completely, leave an expansion area of at
least 2.5 cm (1").
WARNING! Petrol is highly inflammable.
!
Exercise care and refuel outdoors (see
safety instructions).
IMPORTANT INFORMATION
Do not use the fuel tank as a support area.
PRESENTATION
Release lever (112C)
The release control must be pulled out in order for the
machine to be moved when the engine is shutoff. Pull the
controls to the end positions, do not use an intermediate
position.
Pull out the control to disengage the drive system.
Push in the control to engage to the drive system.
– 13
English

Hide quick links:

Advertisement

loading

  Also See for Husqvarna Rider 112C

This manual is also suitable for:

Rider 112c5