1 Charge the battery for 4 hours at max. 3 amp.
2 Fit steering wheel, seat and any optional equipment.
3 Check and adjust tyre pressure. (60 kPa, 0.6 bar, 9 psi).
4 Check that the right amount of oil is in the engine.
5 Make sure the battery is connected.
6 Fill with fuel and start engine.
7 Check that machine does not move in neutral.
Operation of blades.
Seat safety switch.
Lif lever safety switch.
Safety switch for parking brake.
Check engine speed. See the Technical data section.
9 Tell customer about:
Needs and beneﬁts of following the service schedule.
Servicing and the inﬂuence of this journal on the second-hand value of the machine.
Range of applications for BioClip.
Complete proof of sale etc.
Pre-delivery service carried out. No outstanding problems. Certiﬁed:
Date, mileage, stamp, signature
After the ﬁrst 8 hours
1 Change engine oil